Browsing Completed projects final reports by Author "Anderson, SI"
Now showing items 1-3 of 3
-
Crack detection and durability assessment of low speed sugar mill gears
Anderson, SI; Loughran, JG (1995)Heavy low speed gearing used by the Australian Sugar Industry is manufactured according to code specifications. These gears fail in several ways with the most common failure modes being the gradual surface fatigue of the ... -
Determination of fracture properties of cast steels : Project - JCU9S
Anderson, SI; Loughran, JG (1998)Technology currently exists to estimate the structural durability of cracked sugar mill gears and mill roller shafts. Both SRDC projects JCU2S (Crack detection and durability assessment of low speed gears) and JCU6S (Finite ... -
Finite element and durability modelling of roller shells and shafts
Anderson, SI; Loughran, JG (1998)The technology that has been adopted by the Australian raw sugar industry for roller shells and shafts has evolved over the past 40 years. Apart from Crawford's theoretical calculations on shell design and Cullen's factory ...
Contact Us | Send Feedback
- © Sugar Research Australia Limited 2015
- Copyright in this document is owned by Sugar Research Australia Limited (SRA) or by one or more other parties which have provided it to SRA, as indicated in the document. With the exception of any material protected by a trade mark, this document is licensed under a Creative Commons Attribution-NonCommercial 4.0 International licence (as described through this link). Any use of this publication, other than as authorised under this licence or copyright law, is prohibited.
- http://creativecommons.org/licenses/by-nc/4.0/legalcode - This link takes you to the relevant licence conditions, including the full legal code.
- In referencing this document, please use the citation identified in the document.
- Disclaimer:
- In this disclaimer a reference to "SRA" means Sugar Research Australia Ltd and its directors, officers, employees, contractors and agents.
- This document has been prepared in good faith by the organisation or individual named in the document on the basis of information available to them at the date of publication without any independent verification. Although SRA does its best to present information that is correct and accurate, to the full extent permitted by law SRA makes no warranties, guarantees or representations about the suitability, reliability, currency or accuracy of the information in this document, for any purposes.
- The information contained in this document (including tests, inspections and recommendations) is produced for general information only. It is not intended as professional advice on any particular matter. No person should act or fail to act on the basis of any information contained in this document without first conducting independent inquiries and obtaining specific and independent professional advice as appropriate.
- To the full extent permitted by law, SRA expressly disclaims all and any liability to any persons in respect of anything done by any such person in reliance (whether in whole or in part) on any information contained in this document, including any loss, damage, cost or expense incurred by any such persons as a result of the use of, or reliance on, any information in this document.
- The views expressed in this publication are not necessarily those of SRA.
- Any copies made of this document or any part of it must incorporate this disclaimer.
