Search
Now showing items 1-10 of 14
Determine the optimum tube dimensions for Robert evaporators through experimental investigations and CFD modelling: final report 2012/054
(Sugar Research Australia Limited, 2017)
Experimental investigations were undertaken in a single tube pilot evaporator for nine tubes of
three different lengths and three different diameters to determine the optimum tube dimensions for
Robert evaporators. ...
Evaporator liquor brix sensor : final report 2017/003
(Sugar Research Australia Limited, 2019)
A Pro-M-tec Ultrasonic Time of Flight (TOF) sensor was installed for trials at Victoria Mill in 2017. The
TOF instrument calculates the brix of a liquid using the measurement of temperature and velocity of
an ultrasonic ...
Advanced computer simulation of sugar factories - SysCAD : revised final report 2010/040
(Sugar Research Australia Limited, 2014)
This project aims to develop a highly adaptable 'whole of sugar factory' process model that includes the capability to incorporate a variety of adjunct processing options e.g. cogeneration, biofuel production from molasses, ...
Reducing in surging in shredders : final report 2019/204
(Sugar Research Australia Limited, 2020)
Cane shredders and the level of cane preparation achieved by them play a significant role in the performance of
every mill’s extraction train. The application of feeder rolls to shredders has a twofold objective of ...
Implement supervisory/advisory control of pan and fugal stations : final report 2010/038
(Sugar Research Australia Limited, 2015)
Evaluate the suitability of the fixed element crystalliser for widespread adoption in Australian sugar factories : final report 2019/202
(Sugar Research Australia Limited, 2020)
The fixed-element design of a horizontal cooling crystalliser is relatively new to the Australian industry and the installation at Broadwater Mill for the 2017 season proved to be an economical solution to refurbish the ...
Evaluate the performance of the falling film tube evaporator at Bingera Mill : final report 2019/201
(Sugar Research Australia Limited, 2020)
For the 2018 season Bundaberg Sugar installed a 4000 m2 falling film tube evaporator (FFTE) of the BMA design at No 1 evaporator position at Bingera Mill. This was the first installation of a FFTE into the Australian ...
Developing a new methodology for competency based training courses for shift supervisors in sugar factories : revised final report QUT032
(Sugar Research Australia Limited, 2014)
The provision of effective training of supervisors and operators is essential if sugar factories are to operate profitably and in an environmentally sustainable and safe manner. The benefits of having supervisor and operator ...
Develop a blueprint for the introduction of new processing technologies for Australian factories: final report 2015/043
(Sugar Research Australia Limited, 2018)
Several overseas factories are using technologies that reduce their process steam consumptions to very low levels, e.g. lower than 32% on cane, which are much lower than achieved by the most steam efficient Australian ...
Improving mill efficiency through rapid analysis methodologies : final report 2014/051
(Sugar Research Australia Limited, 2017)
A rapid analysis system for measuring key constituents in sugarcane factory products has been
developed using diode array (DA) near infrared (NIR) spectroscopic technology. Analysis of key
constituents in prepared cane, ...