Search
Now showing items 1-10 of 27
Regeneration of sugarcane plants from protoplasts and application of genetic transformation systems to sugarcane
(1986)
Current gene transfer systems developed for modifying plants include direct gene transfer to protoplasts and Agrobacterium mediated gene transfer. These studies have important practical implications for application of ...
Evaluation of laser produced stainless steel screens
(1987)
In an effort to develop a more acceptable alternative to the chrome-nickel screens presently in use, BSES approached the CSIRO Division of Manufacturing Technology in Sydney towards the end of 1985 to ascertain the feasibility ...
Progress report on BSES and WRC studies of water quality in Woongarra-Pemberton area - July 1981
(1981)
This report summarizes results of a pot trial comparing bore and surface water; co-operative monitoring of water-table levels with the Water Resources Commission; field trials with various ameliorants; and a field survey ...
Biomass accumulation in sugarcane (NERDD&D Project 79/9028 - Final)
(1984)
Growth analysis experiments were conducted at Ayr and Bundaberg from 1979 to 1982 to study biomass accumulation in plant and ratoon crops of sugarcane. Crops were planted and ratooned in March, June, September and December, ...
Data-base and data handling programs for Plant Data Record
(1981)
The information contained in the BSES Plant Data Record is stored in computer data-bases for reporting and reference. Data for both the 1979 and 1980 seasons is stored at Bundaberg and reports for each of these years were ...
An investigation of factors affecting ash in first expressed juice in the Rocky Point mill area.
(1981)
Because of a deep concern at the level of ash in Rocky Point sugars and the lack of information on inorganic composition of juices entering the factory the management of W H Heck and Sons requested BSES to undertake an ...
Open area and screen resistance measurements on fugal screens (Chemical Engineering Department, University of Queensland March 21-25, 1988)
(1988)
To determine whether the decrease in fugal capacity was due to the working screen or the wedgewire backing supporting it, a series of measurements were carried out on test specimens cut from the top, middle and bottom of ...
Fibre characteristics of cane - results of measurements carried out at Bundaberg during 1986 season
(1986)
During September, 1986 the decision was made to test for extreme fibre characteristics all cane varieties which are prospective Q canes, in the last season before release. The purpose of these tests was to obtain some ...
Contact Us | Send Feedback
- © Sugar Research Australia Limited 2015
- Copyright in this document is owned by Sugar Research Australia Limited (SRA) or by one or more other parties which have provided it to SRA, as indicated in the document. With the exception of any material protected by a trade mark, this document is licensed under a Creative Commons Attribution-NonCommercial 4.0 International licence (as described through this link). Any use of this publication, other than as authorised under this licence or copyright law, is prohibited.
- http://creativecommons.org/licenses/by-nc/4.0/legalcode - This link takes you to the relevant licence conditions, including the full legal code.
- In referencing this document, please use the citation identified in the document.
- Disclaimer:
- In this disclaimer a reference to "SRA" means Sugar Research Australia Ltd and its directors, officers, employees, contractors and agents.
- This document has been prepared in good faith by the organisation or individual named in the document on the basis of information available to them at the date of publication without any independent verification. Although SRA does its best to present information that is correct and accurate, to the full extent permitted by law SRA makes no warranties, guarantees or representations about the suitability, reliability, currency or accuracy of the information in this document, for any purposes.
- The information contained in this document (including tests, inspections and recommendations) is produced for general information only. It is not intended as professional advice on any particular matter. No person should act or fail to act on the basis of any information contained in this document without first conducting independent inquiries and obtaining specific and independent professional advice as appropriate.
- To the full extent permitted by law, SRA expressly disclaims all and any liability to any persons in respect of anything done by any such person in reliance (whether in whole or in part) on any information contained in this document, including any loss, damage, cost or expense incurred by any such persons as a result of the use of, or reliance on, any information in this document.
- The views expressed in this publication are not necessarily those of SRA.
- Any copies made of this document or any part of it must incorporate this disclaimer.
