Search
Now showing items 1-10 of 11
Determine the optimum tube dimensions for Robert evaporators through experimental investigations and CFD modelling: final report 2012/054
(Sugar Research Australia Limited, 2017)
Experimental investigations were undertaken in a single tube pilot evaporator for nine tubes of
three different lengths and three different diameters to determine the optimum tube dimensions for
Robert evaporators. ...
Evaporator liquor brix sensor : final report 2017/003
(Sugar Research Australia Limited, 2019)
A Pro-M-tec Ultrasonic Time of Flight (TOF) sensor was installed for trials at Victoria Mill in 2017. The
TOF instrument calculates the brix of a liquid using the measurement of temperature and velocity of
an ultrasonic ...
Advanced computer simulation of sugar factories - SysCAD : revised final report 2010/040
(Sugar Research Australia Limited, 2014)
This project aims to develop a highly adaptable 'whole of sugar factory' process model that includes the capability to incorporate a variety of adjunct processing options e.g. cogeneration, biofuel production from molasses, ...
Implement supervisory/advisory control of pan and fugal stations : final report 2010/038
(Sugar Research Australia Limited, 2015)
Developing a new methodology for competency based training courses for shift supervisors in sugar factories : revised final report QUT032
(Sugar Research Australia Limited, 2014)
The provision of effective training of supervisors and operators is essential if sugar factories are to operate profitably and in an environmentally sustainable and safe manner. The benefits of having supervisor and operator ...
Develop a blueprint for the introduction of new processing technologies for Australian factories: final report 2015/043
(Sugar Research Australia Limited, 2018)
Several overseas factories are using technologies that reduce their process steam consumptions to very low levels, e.g. lower than 32% on cane, which are much lower than achieved by the most steam efficient Australian ...
Improving mill efficiency through rapid analysis methodologies : final report 2014/051
(Sugar Research Australia Limited, 2017)
A rapid analysis system for measuring key constituents in sugarcane factory products has been
developed using diode array (DA) near infrared (NIR) spectroscopic technology. Analysis of key
constituents in prepared cane, ...
Improved modelling of wet scrubbers : final report 2012/055
(Sugar Research Australia Limited, 2017)
While wet scrubbers have high collection efficiency, operational problems associated
with many wet scrubber installations reduce boiler steam output and, therefore, factory
crushing rates. These problems include:
Flocculation and sedimentation of slow settling mud and mud cake conditioning : final report 2012/056
(Sugar Research Australia Limited, 2015)
The project aimed to improve the flocculation and sedimentation of slow settling mud, and reduce the pol/moisture content of mill mud by: Identifying key parameters which are associated with difficult to clarify soils; ...
Biomass characterisation facility for extended stockpile model accuracy and capability: final report project 2011/049
(Sugar Research Australia Limited, 2015)
Two issues critical to the design and operation of stockpiles are prevention of spontaneous combustion and minimisation of loss of heating value due to deterioration. There are currently few tools available to the industry ...