Search
Now showing items 31-40 of 50
Evaluate the performance of the falling film tube evaporator at Bingera Mill : final report 2019/201
(Sugar Research Australia Limited, 2020)
For the 2018 season Bundaberg Sugar installed a 4000 m2 falling film tube evaporator (FFTE) of the BMA design at No 1 evaporator position at Bingera Mill. This was the first installation of a FFTE into the Australian ...
Improved batch pan monitoring, control and optimization - a soft sensor approach : SRDC final project JCU018
(SRDC, 2001)
Cane sugar is manufactured in process vessels called vacuum pans, which are
closely supervised by operating personnel, known as pan boilers. Traditionally, the
pan boiler’s job has been made easier through the use of a ...
Evaluation of laser produced stainless steel screens
(BSES, 1987)
In an effort to develop a more acceptable alternative to the chrome-nickel screens presently in use, BSES approached the CSIRO Division of Manufacturing Technology in Sydney towards the end of 1985 to ascertain the feasibility ...
Developing a new methodology for competency based training courses for shift supervisors in sugar factories : revised final report QUT032
(Sugar Research Australia Limited, 2014)
The provision of effective training of supervisors and operators is essential if sugar factories are to operate profitably and in an environmentally sustainable and safe manner. The benefits of having supervisor and operator ...
Develop a blueprint for the introduction of new processing technologies for Australian factories: final report 2015/043
(Sugar Research Australia Limited, 2018)
Several overseas factories are using technologies that reduce their process steam consumptions to very low levels, e.g. lower than 32% on cane, which are much lower than achieved by the most steam efficient Australian ...
Improving mill efficiency through rapid analysis methodologies : final report 2014/051
(Sugar Research Australia Limited, 2017)
A rapid analysis system for measuring key constituents in sugarcane factory products has been
developed using diode array (DA) near infrared (NIR) spectroscopic technology. Analysis of key
constituents in prepared cane, ...
Brix determination in first expressed juice by mass flow meter : SRDC final report SD97011
(BSES, 1997)
A series of trials have been carried out to evaluate the performance of a Micro Motion CMF025 mass flow meter in place of the standard hydrometer for brix measurement in cane pay analyses. Tests were conducted at ten sugar ...
Improved modelling of wet scrubbers : final report 2012/055
(Sugar Research Australia Limited, 2017)
While wet scrubbers have high collection efficiency, operational problems associated
with many wet scrubber installations reduce boiler steam output and, therefore, factory
crushing rates. These problems include:
Factors affecting the sugar content of sugar cane in the wet tropics of Queensland: statistical analysis of ccs data at Babinda and Tully
(BSES, 1972)
In the wet tropics, the sugar content of crops is usually below the state's average and is a critical factor in farm economy, particularly during years of low sugar prices. This aspect of sugar production has been the ...
Flocculation and sedimentation of slow settling mud and mud cake conditioning : final report 2012/056
(Sugar Research Australia Limited, 2015)
The project aimed to improve the flocculation and sedimentation of slow settling mud, and reduce the pol/moisture content of mill mud by: Identifying key parameters which are associated with difficult to clarify soils; ...