Implementing a framework for farmers to engage in the use of Precision Technologies; final report 2012/013
MetadataShow full item record
This research project's objectives are: Development of PA fundamental training and resources Pilot the delivery of PA training to ensure a consistent and fundamental level of knowledge across agronomist and advisors within the regions selected Develop a Hazard Analysis and Critical Control Point (HACCP) based framework for implementing precision technologies within the sugar industry Implementation of the HACCP based framework to focus on the key factors that are driving sugar cane production, monitor them and assure the correct management is in order to optimise production and profit of the Australian sugar industry Production of a package of resource materials covering both the basis of PA and the adoption framework in CD and/or web-hosted format. These legacy materials will ensure growers and advisors have a methodical way to apply precision technologies to optimise production and be able to be used long past the completion of this project.
Please use this to cite or link to this itemhttp://hdl.handle.net/11079/17022
Contact Us | Send Feedback
- © Sugar Research Australia Limited 2015
- Copyright in this document is owned by Sugar Research Australia Limited (SRA) or by one or more other parties which have provided it to SRA, as indicated in the document. With the exception of any material protected by a trade mark, this document is licensed under a Creative Commons Attribution-NonCommercial 4.0 International licence (as described through this link). Any use of this publication, other than as authorised under this licence or copyright law, is prohibited.
- http://creativecommons.org/licenses/by-nc/4.0/legalcode - This link takes you to the relevant licence conditions, including the full legal code.
- In referencing this document, please use the citation identified in the document.
- In this disclaimer a reference to "SRA" means Sugar Research Australia Ltd and its directors, officers, employees, contractors and agents.
- This document has been prepared in good faith by the organisation or individual named in the document on the basis of information available to them at the date of publication without any independent verification. Although SRA does its best to present information that is correct and accurate, to the full extent permitted by law SRA makes no warranties, guarantees or representations about the suitability, reliability, currency or accuracy of the information in this document, for any purposes.
- The information contained in this document (including tests, inspections and recommendations) is produced for general information only. It is not intended as professional advice on any particular matter. No person should act or fail to act on the basis of any information contained in this document without first conducting independent inquiries and obtaining specific and independent professional advice as appropriate.
- To the full extent permitted by law, SRA expressly disclaims all and any liability to any persons in respect of anything done by any such person in reliance (whether in whole or in part) on any information contained in this document, including any loss, damage, cost or expense incurred by any such persons as a result of the use of, or reliance on, any information in this document.
- The views expressed in this publication are not necessarily those of SRA.
- Any copies made of this document or any part of it must incorporate this disclaimer.